Maintenance Guide

Appendix B
71 smarttech.com/kb/170450
Appendix B: Resetting the room system to
factory defaults
This appendix explains how to reset the room system to factory defaults.
In most situations, you should reset the room system from the Settings screen. However, if the room
system is in an unrecoverable state or the Settings screen is otherwise not accessible, you can reset
the room system from the BIOS.
To reset the room system from the Settings screen
1. On the console, press Options, and then press Settings.
The Enter your credentials screen appears.
2. Type the room system administrator account’s user name and password, and then press
Authenticate.
The room system restarts.
3. Type the room system administrator account’s user name and password, and then press
ENTER.
The Settings screen appears.
4. Press Web Updates.
5. Press Reset the Device to Factory Image.
The room system restarts, and the software is reset to factory defaults.
6. Complete the procedure in Configuring your room system’s software on page 11.