Maintenance Guide

A P P E N D I X A
Using the interactive flat panel on-screen display menu
62 smarttech.com/kb/170450
Option Values Function Notes (if any)
USB2 VGA1
VGA2
DVI
HDMI1
HDMI2
HDMI3/PC
DISABLE
Sets the video input for the USB2
receptacle, or disables the
receptacle
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
SETUP RESET [N/A] Resets all options in the SETUP
menu to their default values
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Lync® ROOM RESET [N/A] Resets options in all menus to their
default values (for
SMARTRoomSystems)
You use this option when you first
configure the
SMARTRoomSystem (see
Turning on your room system for
the first time on page 12).
FACTORY RESET [N/A] Resets options in all menus to their
default values
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Medium room on-screen display menu
Option Values Function Notes (if any)
PICTURE
Picture Mode
Picture Mode Vivid
Standard
Ambient
Expert1
Expert2
Sets the picture mode The other options in the Picture
Mode menu change depending on
which value you select for this
option.
The options documented in this
table are those that appear when
you select Vivid, Standard or
Ambient in this option.
Alternatively, you can press the
PSM button on the remote control
to access this option.
In Bright 1–100 Sets the image brightness for
brightly lit rooms
You can modify this option only if
you select Ambient in Picture
Mode.
The value of this menu option can’t
be less than the value of In Dark.
In Dark 0–99 Sets the image brightness for dimly
lit rooms
You can modify this option only if
you select Ambient in Picture
Mode.
The value of this menu option can’t
be more than the value of In Bright.