Maintenance Guide

A P P E N D I X A
Using the interactive flat panel on-screen display menu
61 smarttech.com/kb/170450
Option Values Function Notes (if any)
CEC ENABLE
DISABLE
Enables or disables Consumer
Electronics Control (CEC) support
on HDMI inputs
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
HEAT STATUS
FAN1 [N/A] Shows the status of the first fan This option only provides
information. You’re unable to
modify it.
FAN2 [N/A] Shows the status of the second fan This option only provides
information. You’re unable to
modify it.
SENSOR1 [N/A] Shows the temperature reading
from the first sensor
This option only provides
information. You’re unable to
modify it.
SENSOR2 [N/A] Shows the temperature reading
from the second sensor
This option only provides
information. You’re unable to
modify it.
FAN CONTROL
COOLING FAN ON
AUTO
Sets the fan to run continuously
(ON) or only when the sensor
temperature is greater than
optimal sensor temperature
(AUTO)
FAN SPEED LOW
HIGH
Sets the speed of the fan
SENSOR1 35–55 Sets the optimal temperatures for
the first sensor (in degrees
Celsius)
SENSOR2 35–55 Sets the optimal temperatures for
the second sensor (in degrees
Celsius)
USB SETTING
USB1 VGA1
VGA2
DVI
HDMI1
HDMI2
HDMI3/PC
DISABLE
Sets the video input for the USB1
receptacle, or disables the
receptacle
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.