Maintenance Guide

A P P E N D I X A
Using the interactive flat panel on-screen display menu
60 smarttech.com/kb/170450
Option Values Function Notes (if any)
MONITOR INFO
MODEL NAME [N/A] Shows the interactive flat panel’s
model number
This option only provides
information. You’re unable to
modify it.
SERIAL NUMBER [N/A] Shows the interactive flat panel’s
serial number
This option only provides
information. You’re unable to
modify it.
OSD TRANSPARENCY TYPE1
TYPE2
OFF
Sets the on-screen display menu
transparency
OSD RESET [N/A] Resets all options in the OSD
menu to their default values
SETUP
POWER SAVE ON
OFF
Enables or disables PowerSave
mode
Don’t change this option from its
default value.
STANDBY MODE STANDBY
ECO
STANDBY
Sets the Standby mode to reduce
power consumption
Don’t change this option from its
default value.
DDC CI ENABLE
DISABLE
Enables or disables two-way
communication and control of the
interactive flat panel
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
SCAN MODE UNDER SCAN
OVER SCAN
Sets the scanning mode This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
FBC CONTROL ENABLE
DISABLE
Enables or disables the front
control panel
Don’t change this option from its
default value.
MONITOR ID 1–100 Sets the interactive flat panel’s ID This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
PROXIMITY CONTROL
PROXIMITY ENABLE
DISABLE
Enables or disables presence
detection
You can modify this option only if
you select STANDBY in
STANDBYMODE.
RE-ENABLETIME 1–10 Sets how long the interactive flat
panel waits before detecting
motion again (in minutes)
You can modify this option only if
you select ENABLE in
PROXIMITY.
AUTOPOWEROFF 15–240 Sets when the interactive flat panel
automatically turns off (in minutes)
You can modify this option only if
you select ENABLE in
PROXIMITY.
BRIGHTNESS 0–100 Sets the brightness of the welcome
screen
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.