Maintenance Guide
C H A P T E R 5
Maintaining your room system
35 smarttech.com/kb/170450
To calibrate an interactive flat panel
1. On the console, press Options, and then press Settings.
The Enter your credentials screen appears.
2. Type the room system administrator account’s user name and password, and then press
Authenticate.
The room system restarts.
3. Type the room system administrator account’s user name and password, and then press
ENTER.
The Settings screen appears.
4. Press OEM Settings, and then press SMART Board Settings.
SMARTSettings appears.
5. Press SMART Hardware Settings.
6. Select the interactive flat panel you want to calibrate.
7. Select Advanced Settings from the drop-down list.
8. Press Calibrate.
The calibration screen appears. This can take a few moments.
N O T E
If the calibration screen doesn’t appear on the selected interactive flat panel, move it to the
selected interactive flat panel by pressing the spacebar on the keyboard or the Orient button
on the interactive flat panel’s color select module.