Maintenance Guide

C H A P T E R 3
Configuring your room system’s software
12 smarttech.com/kb/170450
l You have the necessary information to connect the room system to the Lync Server, including
the following:
o
IP addresses for DNS servers (if not configured automatically from the network via DHCP)
o
Administrator user name and password to be applied to the room system
o
Lync appliance computer name for network presence
o
Lync account name and password for the room system
o
SIP URI address
l A USB mouse and keyboard are connected to the Lync appliance for use during the software
configuration.
Turning on your room system for the first time
To turn on your room system for the first time
1. Turn on the room system using the power switch located on the bottom of the interactive flat
panel.
Small room Medium room Large room (×2)
N O T E
In large room installations, turn on both interactive flat panels.