Laptop User Manual
Table Of Contents
- Important Information
- About the SMART Hub PE260
- Configuring the SMART Hub PE260
- Before Configuring the SMART Hub PE260
- Getting Started
- Understanding User and Configuration Modes
- Using the SMART Configuration Tools
- Entering the Activation Key for Multiple Projectors and Displays
- Configuring the Projectors and Displays
- Configuring the SMART Interactive Products
- Configuring the Display Controller
- Configuring Networking Features
- Setting the Date and Time
- Installing Printers
- Switching to User Mode
- Updating the SMART Hub PE260’s Software
- Troubleshooting
- Regulatory Compliance
- Customer Support
ii Important Information 99-00898-20 REV B0
Warnings and Cautions
WARNING
Failure to follow the installation instructions shipped with the SMART Hub
PE260 could result in personal injury and damage to the product.
WARNING
Ensure that any cables extending across the floor to the SMART Hub PE260
are properly bundled and marked to avoid a trip hazard.
WARNING
Make sure an electrical socket is near the SMART Hub PE260 and remains
easily accessible during use.
WARNING
To reduce the risk of fire or electric shock, do not expose the SMART Hub
PE260 to rain or moisture.
CAUTION
Install the SMART Hub in a well ventilated area to allow proper cooling.
CAUTION
Do not open or disassemble the SMART Hub PE260. Opening the casing voids
your warranty.