Car Amplifier User Manual

Room module connections

The room module includes relevant connections.

g To set the relay settings

Select the preferred mode on the SystemSettings tab from the following table:

Setting Result

Latching Relay is active until the next pulse is received.

200 ms pulse Relay is active for 200 milliseconds.

400 ms pulse Relay is active for 400 milliseconds.

600 ms pulse Relay is active for 600 milliseconds.

g To set the relay trigger

If you want both the Soft button and the 6-12V input to trigger the relay, select either on the

SystemSettings tab.

If you want the Soft button to trigger the relay, select mic.

If you want the 6-12V input to trigger the relay, select 6–12v.

N O T E

If you select 6-12V input as a relay trigger, the input can also set duck audio volume on the

same signal. For more information, see Setting the volume during a 6-12V input on page 38.

C H A P T E R 5

Customizing your settings