Car Amplifier User Manual

Setting a Soft button long response
You can designate a response for when a user presses the Soft button on a microphone for longer
than four seconds. Typically you can use this to mute auxiliary audio inputs but it can also trigger a
relay or have no action.
g To set a Soft button long response
If you want to mute auxiliary audio inputs at the control unit, select Aux Mutein the Soft Button
- Long drop-down list on the Microphones tab.
If you want to trigger a relay in the relay input, select Relay.
If you don’t want a response when you press the Soft button for longer than four seconds,
select No Action.
Changing the audio input names and trims
The Input Names/Trims tab enables you to do the following:
l Change the name of any audio input at the control unit so that it’s more recognizable in
SMARTAudio configuration software. Each input can be named from one of the preset input
labels or can be user defined.
l Trim the audio inputs that arrive at the control unit to reduce their volume.
g To change the name of an auxiliary audio input device
1. Identify the input you want to rename on the InputNames/Trims tab.
2. Select the name you want for that input from the drop-down list. You can also select User
Defined, and then type a name for the input device.
g To change the trim of an auxiliary audio input device
Select the input you want to trim on the InputNames/Trims tab, and then set the trim.
Other system settings
The System Settings tab enables you to do the following:
l Change the volume of the active input device at the microphone.
l Set a response for the room module relay.
l Set a trigger for the room module relay.
C H A P T E R 5
Customizing your settings
42