Car Amplifier User Manual

Setting amplifier trim

If a speaker is too loud or too quiet for a portion of the room, you can adjust the speaker trim from -12

dB to 6 dB in 1 dB increments.

N O T E

Adjusting the trim too high can cause feedback.

g To set amplifier trim

Use the up and down arrows in the Amplifier Trims area on the Speaker Control tab to adjust

the trim.

N O T E

The default setting is 0 dB.

Saving and recalling equalization settings

You can save equalization settings in the room module to enable you to respond to different situations

in the same SMARTAudio system installation or to save several rooms’ equalization settings in the

same LPT file, and then later apply them to each individual room.

g To save equalization settings

1. Create your equalization settings on the Speaker Control tab.

2. Select the name you prefer for the current equalization from the Save EQ drop-down list.

3. Click the Save Selected EQ button.

g To recall equalization settings

Select an equalization from the RecallEQ drop-down list on the Speaker Control tab.

C H A P T E R 5

Customizing your settings