Car Amplifier User Manual

T I P
You can also adjust the volume of inputs at the input source. To adjust the input from the
SMARTAudio system microphone, see Controlling an auxiliary audio input device from your
microphone on page 17.
g To adjust the volume of an auxiliary audio input device
1.
Press the SMART Audio icon on the SMARTNotebook software toolbar.
SMARTAudio software appears.
2. Slide the input’s volume slider up or down for the input.
g To mute an auxiliary audio input device
Start SMARTAudio software, and then press the un-muted speaker icon below the input
volume slider.
g To restore an auxiliary audio input device’s volume
Start SMARTAudio software, and then press the muted speaker icon below the input
volume slider.
Adjusting the speaker tone
The SMARTAudio system enables you to adjust the brightness of the speaker tone.
g To adjust the brightness of the speaker tone
1.
Press the SMARTAudio icon on the SMARTNotebook software toolbar.
SMARTAudio software appears.
2. Locate the Speaker Tone area.
3. Press High, Medium or Low.
Checking your microphone battery level
You can use SMARTAudio software to check your microphone battery level.
N O T E
If your microphone battery level is below 10%, the microphone status light flashes red. For more
information, see Troubleshooting using the microphone status light on page 47.
C H A P T E R 4
Using SMARTNotebook software to change your settings
26