User manual

A P P E N D I X A
Using the interactive flat panel on-screen display menu
63
Option Values Function Notes (if any)
Ready State
Brightness
0–100 Sets the brightness of the
welcome screen
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
USB Setting
USB 1 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB1
port, or disables the port
Don’t change this option from its
default value.
USB 2 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB2
port, or disables the port
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
USB 3 HDMI1
HDMI2
HDMI3/PC
DVI-D
DPORT
VGA
Disable
Sets the video input for the USB3
port, or disables the port
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Lync® Room Reset Reset
Cancel
Resets options in all menus to
their default values (for
SMARTRoomSystems)
You use this option when you first
configure the
SMARTRoomSystem (see
Turning on your room system for
the first time on page 12).
CEC Enabled
Disable
Enables or disables Consumer
Electronics Control (CEC)
support on HDMI inputs
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
FBC Control On
Off
Enables or disables the front
control panel
Don’t change this option from its
default value.
SUPPORT
Model/Type [N/A] Shows the interactive flat panel’s
model number
This option only provides
information. You’re unable to
modify it.
Software Version [N/A] Shows the interactive flat panel’s
firmware version number
This option only provides
information. You’re unable to
modify it.
Serial Number [N/A] Shows the interactive flat panel’s
serial number
This option only provides
information. You’re unable to
modify it.
Customer Service
Centre
[N/A] Provides information on how to
contact SMARTSupport
This option only provides
information. You’re unable to
modify it.