User manual

A P P E N D I X A
Using the interactive flat panel on-screen display menu
62
Option Values Function Notes (if any)
Sleep Timer 10–240
Off
Specifies the amount of inactivity
(in minutes) before the
interactive flat panel turns off, or
disables the sleep timer feature
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
OPTION
Language [Languages] Sets the on-screen display
menu’s language
ISM Method Normal
Colour Wash
Sets the method for image
stickiness minimisation (ISM)
ISM prevents static images that
appear in the same location for
long periods of time from causing
screen burn-in.
Key Lock On
Off
Enables or disables key lock
Fail Over
Mode Off
Auto
Manual
Specifies the fail over mode This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
DPM Select On
Off
Enables or disables DPM Select This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
DivX® VOD Registration
Deregistration
Registers DivX video-on-
demand (VOD)
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Initial Setting Yes
No
Resets options in all menus to
their default values
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Set ID 1–255 Sets the interactive flat panel’s ID This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Standby Mode Standby Sets the Standby mode to reduce
power consumption
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Proximity Control
Proximity Control On
Off
Enables or disables presence
detection
Re-enable Time 1–10 Sets how long the interactive flat
panel waits before detecting
motion again (in minutes)
Auto Power Off 15–240 Sets when the interactive flat
panel automatically turns off (in
minutes)
Welcome OSD Enabled
Disable
Enables or disables the welcome
screen
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
Welcome Timeout 5–30 Sets how long the welcome
screen appears (in seconds)
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.