User manual
A P P E N D I X A
Using the interactive flat panel on-screen display menu
55
Option Values Function Notes (if any)
RIGHT SPEAKER ON
OFF
Enables or disables the right
speaker
Don’t change this option from its
default value.
AUDIO RESET [N/A] Resets all options in the AUDIO
menu to their default values
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
OSD
LANGUAGE [Languages] Sets the on-screen display
menu’s language
OSD TURN OFF 5–240 Sets the time of inactivity before
the on-screen display menu turns
off (in seconds)
OSD H-POSITION 0–100 Sets the horizontal position of the
on-screen display menu
OSD V-POSITION 0–100 Sets the vertical position of the
on-screen display menu
INFORMATION OSD 3–10
OFF
Specifies how long the
information menu displays when
a user changes the video input or
presses the DISPLAY button on
the remote control
MONITOR INFO
MODEL NAME [N/A] Shows the interactive flat panel’s
model number
This option only provides
information. You’re unable to
modify it.
SERIAL NUMBER [N/A] Shows the interactive flat panel’s
serial number
This option only provides
information. You’re unable to
modify it.
OSD TRANSPARENCY TYPE1
TYPE2
OFF
Sets the on-screen display menu
transparency
OSD RESET [N/A] Resets all options in the OSD
menu to their default values
SETUP
POWER SAVE ON
OFF
Enables or disables PowerSave
mode
Don’t change this option from its
default value.
STANDBY MODE STANDBY
ECO
STANDBY
Sets the Standby mode to reduce
power consumption
Don’t change this option from its
default value.
DDC CI ENABLE
DISABLE
Enables or disables two-way
communication and control of the
interactive flat panel
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
SCAN MODE UNDER SCAN
OVER SCAN
Sets the scanning mode This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
FBC CONTROL ENABLE
DISABLE
Enables or disables the front
control panel
Don’t change this option from its
default value.