User manual

A P P E N D I X A
Using the interactive flat panel on-screen display menu
54
Option Values Function Notes (if any)
IN BRIGHT LUX 100–1000 Sets the illuminance level for
brightly lit rooms (in lux)
You can modify this option only if
you select AMBIENT in
PICTUREMODE.
The value of this menu option
can’t be less than the value of
INDARKLUX.
IN DARK LUX 50–950 Shows the illuminance level for
dimly lit rooms (in lux)
You can modify this option only if
you select AMBIENT in
PICTUREMODE.
The value of this menu option
can’t be more than the value of
INBRIGHTLUX.
SENSINGLUX [N/A] Displays the current illuminance
level of the room (in lux)
This option only provides
information. You’re unable to
modify it.
NOISE REDUCTION ON
OFF
Enables or disables image noise
reduction
You can modify this option only if
the currently selected video input
is S-Video or component video.
PICTURE RESET [N/A] Resets all options in the
PICTURE menu to their default
values
ADJUST The options in this menu aren’t applicable to the SMARTRoomSystem.
AUDIO
BALANCE L50–R50 Balances the left and right
volume
This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
TREBLE L50–R50 Sets the high frequency sound This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
BASS L50–R50 Sets the low frequency sound This option isn’t applicable to the
SMARTRoomSystem. Don’t
change it from its default value.
LINE OUT FIXED
VARIABLE
Sets the audio line out Don’t change this option from its
default value.
HDMI3/PC LINE OUT FIXED
VARIABLE
Sets the audio line out for the
room computer (HDMI3/PC)
Don’t change this option from its
default value.
AUDIO INPUT DPORT
USB
IN1
IN2
IN3
HDMI3/PC
ANALOGUE
HDMI3/PC
DIGITAL
Sets the audio input source Alternatively, you can press the
AUDIOINPUT button on the
remote control.
For small room systems without
the table microphone upgrade kit,
this option should be set to
HDMI3/PC ANALOGUE.
For small room systems with the
table microphone upgrade kit and
large room systems, this option
should be set to IN2.
LEFT SPEAKER ON
OFF
Enables or disables the left
speaker
Don’t change this option from its
default value.