User manual
C H A P T E R 5
Maintaining your room system
37
4. If the screen condensation doesnāt evaporate, contact SMARTīSupport
(smarttech.com/contactsupport).
Replacing a pen nib
To prevent damage to your interactive flat panelsā anti-glare coating, replace a pen nib if it
becomes worn. Replacement pen nibs are included with your room system, and you can
purchase additional replacements from your authorised SMART reseller (smarttech.com/where)
or the SMART Parts Store (parts.smarttech.com).
To replace a pen nib
1. Grasp the worn nib on the pen with a pair of pliers and then pull and twist the nib loose.
2. Press the replacement nib into the pen.
Using the kickstands to access connectors
For some maintenance and troubleshooting procedures, you might need to access the interactive
flat panelsā connectors. You can use the kickstands to access these connectors.
To deploy the kickstands
1. Release the kickstand locks by pulling them down.
2. Pull the bottom of the interactive flat panel away from the
wall.