User manual

C H A P T E R 2
Installing your room system’s hardware
10
l Choose an appropriate location for the room system:
o
Do not install the room system in a location where a door or gate could hit it.
o
Do not install the room system in an area where it will be subjected to strong vibrations
or dust.
o
Do not install the room system where the main power supply enters the building.
o
Ensure that adequate ventilation or provide air conditioning around the room system so
that heat can flow away from the unit and the mounting equipment.
o
If you mount the room system in a recessed area, leave at least 10cm (4") of space
between the room system and the recessed walls to enable ventilation and cooling.
l Install the room system so that its centre aligns with the centre of the meeting room table.
This ensures that the meeting room table appears in the centre of the camera’s field of view.
l Install the room system so that the interactive flat panels are the appropriate distance from
the floor.
Distance Small room Medium room Large room
From the floor to the bottom of the
interactive flat panel
81.4cm (32") 74.9cm (29 1/2") 81.4cm (32")
From the floor to the bottom of the
active display area
97cm (38 1/8") 89.9cm (35 3/8") 97cm (38 1/8")