User manual
C H A P T E R 1
Welcome
5
Speakers
The speakers transmit audio from remote participants during a meeting. The room
system’s audio-processing features eliminate echos and in-room audio feedback.
The speakers are installed on either side of the interactive flat panels.
Video connection harness for guest laptops
The video connection harness enables users to connect their laptops to the room system using
either VGA or HDMI connectors. When a user connects his or her laptop, the laptop’s video
output appears on an interactive flat panel and is shared with remote participants.
The video connection harness’s connectors are typically located on the meeting room table.
Table microphone upgrade kit
A table microphone upgrade kit is available for room systems for small rooms.
This upgrade kit enables you to use table microphones rather than the camera-
integrated microphones for specialised or challenging room configurations. The
upgrade kit includes two table microphones, an audio processor and
accompanying cables.
Accessories
Accessories for the SMARTRoomSystem include the wall stand kit and table microphones.
N O T E
For accessory part numbers and ordering information, refer to the specifications (see
Specifications on page 7).
Wall stand kit
The wall stand kit includes a wall stand for each interactive flat panel in
your room system and the cable tracking. The wall stand transfers
some of the weight from the wall to the floor and is required for metal
stud walls that can’t support the full weight of the interactive flat panel.
The cable tracking covers cables running across the floor from the
interactive flat panels to the meeting room table.
Table microphones
Medium and large rooms come with two table microphones. You can purchase
and connect up to three additional table microphones if needed for a total of up to
five table microphones.