Maintenance Guide

Chapter 1 Welcome
smarttech.com/kb/171555 17
Stands
If you want to move the display from place to place, you can install it on a SMART mobile stand. If you
are installing the display on a wall that cannot support the display’s full weight, you can install the display
on a SMART floor stand.
USB extenders
As noted in the display’s specifications, there is a maximum length for USB cable connections between
the display and computer.
When using USB 2.0, the cable should be no longer than 16'(5m).
When using USB 3.0, the cable should be no longer than 9'(3m).
Use one of the following USB extenders if you need a longer USB connection:
Extender Specifications
USB-XT smarttech.com/kb/119318
Notes
l
To extend touch using the SMART CAT 5 USB extender (CAT5-XT-1100) use a touch USB connector
associated with an HDMI 1, HDMI 2, or VGA input. The extender will not function correctly if used
to extend touch associated with the HDMI 3 input on the front of the display.
l
For more information about extending USB connections, see USB
cable extenders.
More information
In addition to this guide, SMART provides other documents for the display in the Support section of the
SMART website (smarttech.com/support
). Scan the QR code on the cover of this guide to view links to
SMARTBoard MX and MX Pro series interactive display documents and other support resources.