User Guide
Table Of Contents
- Cover page
- Important information for your interactive flat panel
- Chapter 1: About your interactive flat panel
- Chapter 2: Installing your interactive flat panel
- Chapter 3: Connecting computers and peripheral devices
- Chapter 4: Installing SMART software
- Chapter 5: Using your interactive flat panel
- Turning on and turning off your interactive flat panel
- Understanding presence detection
- Using the infrared remote control
- Getting started with your SMART Board interactive flat panel
- Playing audio files on your interactive flat panel
- Using the USB receptacle
- Chapter 6: Using guest laptops with your interactive flat panel
- Chapter 7: Maintaining your interactive flat panel
- Updating your SMART software and firmware
- Calibrating your interactive flat panel
- Orienting your interactive flat panel
- Replacing a pen nib
- Cleaning the screen
- Cleaning the presence detection sensors
- Cleaning the camera windows and reflective tape
- Maintaining ventilation
- Preventing condensation
- Checking the interactive flat panel installation
- Removing your interactive flat panel
- Transporting your interactive flat panel
- Chapter 8: Troubleshooting for your interactive flat panel
- Appendix A: Adjusting video settings with the on-screen display menu
- Appendix B: Hardware environmental compliance
- Index
Proximity control settings
The interactive flat panel has two presence detection sensors on its frame that can detect people up
to 16' (5 m) away. When the sensors detect people , the interactive flat panel turns on. When the
sensors no longer detect people, the interactive flat panel turns off.
The settings for the proximity sensors are a sub-menu in the Setup menu.
Menu item Function
PROXIMITY Turns on or turns off the proximity sensors on the interactive flat panel.
If ECO STANDBY in the Setupmenu is enabled, this feature is
disabled.
RE-ENABLETIME Sets how long (1–10 minutes) the interactive flat panel will wait before
detecting motion again. The default is 1 minute.
AUTOPOWEROFF Sets when (15–240 minutes) the interactive flat panel automatically
turns off. The default is 60 minutes.
BRIGHTNESS Sets the brightness of the welcome screen.
A P P E N D I X A
Adjusting video settings with the on-screen display menu
79