User's Manual

APPENDIX A
USING SETTINGS
67 smarttech.com/kb/171164
Option Values Function Notes
MACaddress
[N/A] Shows the display’s MACaddress [N/A]
IPaddress
[N/A] Shows the display’s IPaddress [N/A]
Ethernet
NOTE
Manual configuration isn’t available. The IPaddress is automatically configured via DHCP.
Option Values Function Notes
IP address
[N/A] Shows the display’s IPaddress [N/A]
MACaddress
[N/A] Shows the display’s MACaddress [N/A]
Date & time
Option Values Function Notes
Automatic date & time
[N/A] Sets the display’s date and time
automatically
Configure the network to allow
Network Time Protocol (NTP)
requests to Internet time servers.
See page30.
Set date
[N/A] Sets the display’s date Disable Automatic date & time to
set the date manually.
Set time
[N/A] Sets the display’s time Disable Automatic date & time to
set the time manually.
Select time zone
[N/A] Sets the display’s time zone [N/A]
Use 24-hour format
[N/A] Shows the display’s time using the
24-hour clock
[N/A]
Choose date format
[N/A] Sets the display’s date format [N/A]
Usage Data
Option Values Function Notes
Share Usage Data
[N/A] Sends usage statistics and error
reports to SMART
[N/A]