User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
Appendix B
85 smarttech.com/kb/171164
Appendix B: Remotely managing the display
Connecting a computer to the display 86
Connecting multiple displays 87
Configuring the computer’s serial interface settings 87
Power states 88
Commands and responses 89
Commandinventory 91
Power state 91
Input 92
Brightness 92
Freeze 92
Volume 93
Mute 93
Firmware version 93
Serial number 93
Part number 94
Resolving issues with remote management 94
You can connect a computer to the room control input on the display to remotely select video
inputs, turn the display on or off and get information about the display’s current settings, such as
contrast and power state.