User's Manual

APPENDIX A
USING SETTINGS
77 smarttech.com/kb/171164
Date & time
Option Values Function Notes
Automatic date & time
[N/A] Sets the display’s date and time
automatically
Configure the network to allow
Network Time Protocol (NTP)
requests to Internet time servers.
See page33.
Set date
[N/A] Sets the display’s date Disable Automatic date & time to
set the date manually.
Set time
[N/A] Sets the display’s time Disable Automatic date & time to
set the time manually.
Select time zone
[N/A] Sets the display’s time zone [N/A]
Use 24-hour format
[N/A] Shows the display’s time using the
24-hour clock
[N/A]
Choose date format
[N/A] Sets the display’s date format [N/A]
Usage Data
Option Values Function Notes
Share Usage Data
[N/A] Sends usage statistics and error
reports to SMART
[N/A]
Auto Update
NOTE
To disable automatic system software updates, block access to https://ws.kappboard.com.
Option Values Function Notes
Updates Channel
Stable Channel
Beta Channel
Sets which system software
updates the display receives
When switching from the Beta
Channel to the Stable Channel, a
factory reset occurs. See page74
for more information about factory
reset.
Check for Updates Now
[N/A] Checks for updates to the system
software
NOTE
The display must be connected
to the Internet to check for
system software updates.
If an update is available, the text
changes to Apply update now.