User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
APPENDIX A
USING SETTINGS
75 smarttech.com/kb/171164
Country
Option Values Function Notes
Country
[Countries] Sets the display’s country [N/A]
Security
Option Values Function Notes
Clean up
Clean up policy
Disabled
Manually reset
with the Clean
Up button in the
launcher
1 hour
2 hours
3 hours
1 day
Sets how often the display cleans
up
[N/A]
Clean up the
whiteboard
[N/A] Saves the Whiteboard session to
the Library and erases the
Whiteboard
[N/A]
Clean up the browser
[N/A] Closes the browser tabs and clears
the history, cache and cookies
[N/A]
Clean up other
applications
[N/A] Closes open applications [N/A]
Wi-Fi
NOTE
To add a proxy, see Connecting the display to a network on page36.
Option Values Function Notes
Wi-Fi
[Wireless
networks]
Select a wireless network Turn on Wi-Fi to discover networks.
Scan
[N/A] Scan for wireless networks
Tap More to access this option.
WPS Pin Entry
[N/A] [N/A] Not used
Wi-Fi Direct
[N/A] [N/A] Not used
Advanced
[N/A] Set advanced options for Wi-Fi See Advanced Wi-Fi options on the
next page.