User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 4
CONFIGURING THE DISPLAY
32 smarttech.com/kb/171164
Turning on the display for the first time
Turn on the display after mounting it and connecting power and devices.
To turn on the display for the first time
1. Flick the switch beside the AC power inlet to the ON(I) position.
2. Select your preferred language, and then tap Next.
3. Select your country, and then tap Next.
4. Name the display, and then tap Next.
5. Set the date and time, and then tap Next.
6. If the display isn’t using a wired network connection, select a wireless network, and then tap
Next.
7. Select the list of applications that will appear in the launcher, and then tap Next. For more
information about the apps, see the SMARTBoard 7000 series interactive displays user’s
guide (smarttech.com/kb/171163)
8. Tap Finish.
The Welcome screen appears.