User's Manual

Chapter 3
21 smarttech.com/kb/171164
Chapter 3: Connecting power and devices
Connecting power 22
Connecting to a network 22
Connecting cables for room computers, guestlaptops and other input sources 23
Using recommend cables 24
Connecting to the connector panel 24
Connecting to the convenience panel 25
Viewing a connected computer or other device’s input 25
Connecting external speakers 25
Connecting other devices 26
Connector reference 27
Display connectorpanel 27
Display convenience panel 28
iQ appliance 28
Other connectors 29
Connect the display to power after you install it but before you turn it on for the first time and
configure the iQ appliance. You can also connect cables for room computers, guest laptops or
other input sources as well as for speakers and other devices.
By installing cables in advance, you make use of connectors that might not be accessible after the
display is wall-mounted. You can then run the cables across floors or behind walls as needed.
WARNING
Ensure that any cables that cross the floor to the display are properly bundled and marked to
avoid a trip hazard.