User's Manual

APPENDIX B
REMOTELY MANAGING THE DISPLAY
92 smarttech.com/kb/171164
Input
Get command Set command Response
If one display is connected
get input set input[Value]
Where [Value] is one of the following:
l
=hdmi1
l
=hdmi2
l
=dp1
l
=vga1
l
=ops1
input=[Value]
Where [Value] is one of the following:
l
hdmi1
l
hdmi2
l
dp1
l
vga1
l
ops1
If multiple displays are connected
[Display],@ get input
Where [Display] is the display’s label
(A, B, and so on).
[Display],@ set input[Value]
Where
l [Display] is the display’s label
(A, B, and so on).
l [Value] is one of the following:
o
=hdmi1
o
=hdmi2
o
=dp1
o
=vga1
o
=ops1
@,[Display] input=[Value]
Where
l [Display] is the display’s label
(A, B, and so on).
l [Value] is one of the following:
o
hdmi1
o
hdmi2
o
dp1
o
vga1
o
ops1
Brightness
Get command Set command Response
get brightness set brightness[Value]
Where [Value] is one of the following:
l
+[Value]
l
-[Value]
l
=[5–100]
brightness=[Value]
Where [Value] is a number between 5
and 100
Freeze
Get command Set command Response
get videofreeze set videofreeze[Value]
Where [Value] is one of the following:
l
=on
l
=off
videofreeze=[Value]
Where [Value] is one of the following:
l
on
l
off