User's Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1: Welcome
- Chapter 2: Installing the display
- Chapter 3: Connecting power and devices
- Chapter 4: Configuring the display
- Chapter 5: Configuring connected computers
- Chapter 6: Maintaining the display
- Chapter 7: Troubleshooting
- Troubleshooting the display
- Troubleshooting the display’s software
- Referring to the SMART knowledge base for additional troubleshooting information
- Contacting your reseller for additional support
- Appendix A: Using settings
- Appendix B: Remotely managing the display
- Appendix C: Hardware environmental compliance
CHAPTER 2
INSTALLING THE DISPLAY
15 smarttech.com/kb/171164
Factor Considerations
Environment and
ventilation
l
The location meets the environmental requirements in the display’s
specifications (see More information on page9).
l
The display isn’t subjected to strong vibrations or dust.
l
There is adequate ventilation or air conditioning around the display so
that heat can flow away from the unit and the mounting equipment.
l
If you’re planning to install the display in a recessed area, there is at least
4" (10 cm) of space between the display and the recessed walls to
enable ventilation and cooling.
Choosing a height
Consider the general height of the user community when you choose the height for the display.
SMART recommends that you mount the display so that its top is 6'5" (1.9m) from the floor.