User's Manual

4 Wireless Exit Sensor
6 inches
deep
Sensor
NOTE: DO NOT place in the direct path of a sprinkler.
The module is water resistant but not waterproof.
• DiganarrowtrenchorslitfromtheVehicle
 Sensortothetransmitterlocationusingaat
 spadeorothertool.Thewirefromthewandto
 thetransmittershouldbeatleastsixinches 
 deeptoavoidpossibledamagefromedgers,
 orlawnaerators.
GTO WIRELESS EXIT WAND
TRANSMITTER
CODE
MED
TRANSMIT
ACTIVE
MIN MAX
SENSITIVITY
• FeedtheSignalCablethroughthePVCpipe
 andplugintotheconnectoratthebottomof
 theElectronics/Transmittermodule.
Connecting the Electronics/Transmitter Module
Install the Electronics/Transmitter Module