Quick Start Guide

fusiontlc.com
Raven
8
fusiontlc.com
Raven
9
Enable a zone: a zone that is enabled will display
an intensity value in its respective quadrant. If
a zone is not enabled, no intensity value will be
displayed. If a zone is enabled, the Raven will
trigger it. To enable a zone, press and hold the
Zone Button for 3 seconds OR tap and hold the
zone field on the touchscreen for 3 seconds. The
same process is used to disable a zone.
Select a zone: a zone that is selected will display
a white circle around the zone letter. To select
a zone, press the Zone Button once or tap the
zone on the touchscreen. The same process is
used to deselect a zone.
Edit a zone: select the zones you wish to edit.
Then tap the central zone edit icon:
You will then be taken to the zone edit menu.
Navigating Interface
Zone Control Display
Zone Edit Screen
(1) disable selected zone(s)
(2) enable/disable TTL
(3) enable/disable SpeedCycle
(4) enable/disable MultiPop
(5) enable/disable modeling
light control
(6) enable/disable manual mode
The zone edit menu contains the following
options in clockwise order starting at top:
Quick Settings Menu
This menu is accessed by swiping from top
to bottom while in the Zone Control Display.
The quick settings menu contains the following
options in clockwise order starting at top:
(1) select primary brand channel
(2) cloud software update
(3) screen brightness
(4) primary/secondary brand
selection
(5) speaker on/off
(6) nose cone light on/off