Installation & Assembly

Insert the long arms of the Support Arms
(B) into the ends of the Center Coupler (C)
as shown in Figure 5.
Note: For narrow covers, flip the Support
Arms (B) and insert the short side of the
Support Arm (B) into the Center Coupler
(C).
Insert the short arms of the Support Arms
(B) into the Pivot Arms (A). See Figure 6.
Lay the Lifter on the spa cover, see Figure
7A. Adjust the Center Coupler Assembly
and the Support Arms (B) so that the
Center Coupler Assembly is lying parallel
to the spa cover hinge approximately 1/2”
away. See Figure 7B.
Figure 5
Figure 6
Figure 7A Figure 7B
Cover Hinge
6
7
8
Using the #10 x 5/8“ Self Tapping Screws
(J) to fasten the Support Arms (B) to the
Pivot Arms (A) and the Center Coupler
(C). See Figure 8.
Note: Be sure to rotate the Center Couplers
so that the inserted screws are horizontal,
with the heads facing the back of the spa,
where the cover will be stowed.
Figure 8
9