Installation & Assembly

PRO TIP
Lock each of the Roller Racks into
position by rotating counterclockwise,
then securing the bottom edge of the
brace (Figure 1).
Figure 1
Figure 4
Figure 2
Figure 3
How to Use
1
2
3
4
Do not extend the roller rack arm more
than 90° upward, or damage to the joint
may result.
Flip one cover half over the other.
(Figure 2)
Push the spa cover on top of the roller
racks. Now, enjoy your spa! (Figure 3)
When done, push the folded spa cover
back over the spa, then flip the upside
half back onto the spa. Release the
braces & rotate each roller rack clock-
wise to the rest position. (Figure 4)
• DO NOT sit on open cover. DAMAGE WILL RESULT.
• DO NOT mount roller racks on the front or the equipment side of spa. DAMAGE WILL RESULT.
• DO NOT twist or move roller racks sideways. DAMAGE WILL RESULT.
• DO NOT allow weight resting on the roller system to exceed 75 lbs. DAMAGE WILL RESULT.
• For safety reasons, the roller system should be secured in the lowered position after each use.
• If there is snow on the cover, remove all snow before opening or DAMAGE WILL RESULT.
Warnings