Installation Guide

Fig. B
Mounting Blocks
1.5” clearance between spa and inside arm of Premium Cover
Spa Cover
Premium
Cover Lifter
Bridge Arm
1/2” from spa
cover seam
Mounting
Blocks
Fig. C
5. Next connect these two assembled pieces together with the Side Arms (B) by sliding the
Side Arms into each of the four Corner Pieces as shown in Fig. A DO NOT secure with screws
yet.
6. With the Spa Cover in place on your Spa Cover in place on your Spa, lay the assembled
rectangle assembly on the spa with the Mounting Blocks at the bottom as shown in Fig. C.
Remember, screws face up.