Instructions / Assembly

Position

Performance

Maintenance

Use water or glass cleaner.

0°C/32°F

Frost causes damage, store whole product inside during cold weather.

Frost

This product is designed primarily to operate in summer months but will also work in spring and

autumn provided there is good sunshine. Performance is directly related to the amount and strength

of sunlight received.

We recommend regular maintenance to ensure optimum performance.

Anchor

To prevent the lily floating around use the anchor sack and line

provided. Fill the sack with stones and tie it to the pump, the length

of line can be altered to limit how far the lily can move.

10-25cm

20-50cm 0-10cm

0-30cm

0cm 0cm

0cm

PAGE 1
Anchor To prevent the lily floating around use the anchor sack and line provided. Fill the sack with stones and tie it to the pump, the length of line can be altered to limit how far the lily can move. ü 10-25cm 20-50cm û ü 0-10cm 0-30cm 0cm û 0cm 0cm 0cm Frost ü û 0°C/32°F Position û ü Frost causes damage, store whole product inside during cold weather. Maintenance We recommend regular maintenance to ensure optimum performance. Performance Use water or glass cleaner.
PAGE 2
Pump cleaning solar lily fountain Assembly ! Important! ü û û ` Problem Solving Connect the pump as shown. Ensure connectors are water tight. 1. 2. 3. 4. 5. Check the fountain is positioned correctly, receiving sunlight and not in shade. Check water level and ensure the pump is submerged. Check connections between the pump and panel. Clean all parts as shown and change water. If problems persist contact customer services (refer to contact sheet or website).