Specifications

Page 8

2. Picture setting

Select the “PICTURE” icon to enter the sub-menu setting interface a

shown, then select and adjust the brightness, contrast, saturation and

guideline feature.

3. Mirror-FLP

Select the “MIR-FLP” icon to enter the sub-menu setting interface as

shown, choose and select the correct mode. When used as a backup

camera the image is MIRRORED, this is the default configuration. If the

camera is not used for reversing, then the imager must be switched to

NORMAL mode.

4. Display mode

Select the “MODE” icon to enter the sub-menu setting interface as shown,

choose and select the required display mode combination.