Specifications

Page 7
To enter the system menu interface power on the screen, press the “MENU”
button and use the “
” or “ ” button to move the cursor to the required
sub menu. Press the REC / ENT button to enter the selected sub menu.
1. System Pairing
The purchased set will have been ‘paired’ during the assembly process so the
initial operation should be as simply as power on the system monitor and
camera. If for any reason the camera/ monitor combination needs to be
changed then the system will need to be paired again, the pairing process is
as follows:
a) Using the CAM-CH button select the CAM-CH input to be paired e.g.
CAM1.Confirming the camera is powered off select the “PAIRING” icon
to enter pairing mode. During the visible countdown of 20 seconds,
power on the camera. The system will automatically pair and be
displayed. This system can expand up to 4 cameras, requiring
individual pairing. Repeat the above procedure to pair additional
cameras.
b) Once the system is paired then it will remain paired (with or without
power) until the pairing process is done again.