Specifications

Page 5
Camera Installation
The CAM150WHD Camera installation is simply a matter of bolting the
camera onto the vehicle and supplying reverse power (DC 9V-36V). The only
issue to take into account is mounting location. There are 3 main factors to
consider:
1.Wireless Performance – The wireless communication cannot pass through
metal so it is always better to try and install the camera near the top of truck or
as low as possible so that the signal can effectively travel over the top or
under the vehicle.
2.Viewing Angle – The primary goal of the installation is to ensure the driver
has a complete view of the area behind the vehicle.
3.Protection – In harsh environments please ensure the hardware is
adequately protected from bangs/knocks or the elements.
LCD Monitor Installation
The LCD monitor requires accessory (ignition) power (DC 9V-36V). The only
issue to take into account is mounting location. There are 2 main factors to
consider:
1.Access and Visibility – Ensure the driver can clearly see the screen and
reach the controls.
2.Antenna Location – The wireless system will perform better if the antenna is
pointed upward and is above the height of the window sills – this allows the
wireless signal to transmit through the window glass directly.
Choose mounting location of the LCD monitor.
Attach the surface mounting bracket to the vehicle body using the supplied
mounting screws or bolts.
Adjust the angle of the monitor and fasten the screws firmly.