Specifications

Page 4
Required Tool List Supplied Parts list
Screwdrivers Wireless camera with power cable
Marker pencil Wireless monitor with wiring harness
Drill Monitor stand
Plyers Monitor sunshade
Panel removal tool Installation screws/clips
Soldering iron & solder Antenna rubber stoppers
Voltmeter
Safety Glasses
Set Antenna & Rubber Stopper
This procedure can be used for both the camera and LCD:
1. Screw antenna on the base
2. Align antenna to allow it to point straight up.
3. Adjust antenna as desired. It is recommended that antenna be aligned
straight up for best reception.