Specifications

Page 10
8. Record
Select the “RECORD” icon to enter the sub-menu setting interface as
shown. Choose and select the rewrite and format settings. The initial use of
a new SD card (not supplied) must be formatted prior to using the record
feature. To use the record feature, select the CAM-CH to be recorded e.g.
CAM1or for multiply CAM recording select the CAM-CH display mode
combination e.g. CAM1/CAM2. When the displayed CAM-CH is shown on
monitor press the REC / ENT button to start recording (note the REC icon
on top of screen). Press the REC / ENT button again to pause recording.
Note: the record feature will not record if the monitor is powered off.
Trouble Shooting
If for any reason the system does not function, firstly confirm that both the
camera and monitor have power (check fuses of power cables).
Note the monitor screen has a small blue power activation light on the front.
If the communication is too weak to send an image you will see:
In each instance follow the pairing guide with the camera and monitor in line of
sight (or as close together as possible).