Instructions / Assembly

ADHESIVE APPLICATION:
Adhesive may be used to apply paneling directly to walls as long as the surface is level,
sound and clean. Once the panel is fitted, apply beads of adhesive with a caulking gun
in a continuous strip along the top, bottom and both sides of the panel.
Some supplemental nailing might be necessary to hold the panel in place until the
adhesive sets. Be sure to read the adhesive manufacturer’s instructions carefully prior
to installation, since instructions may vary.
CARE AND MAINTENANCE:
It is recommended to use a vacuum to clean wood planks if needed.
Wood is a natural organic material, which might be fading under direct sunlight and any
bright light. To protect natural wood against color degradation, use standard wood oil or
lacker with UV protection. Spray it to the surface. Wood will appear darker when it oiled.
TOOLS AND SUPPLIES FOR INSTALLATION:
Assemble all your tools and supplies before you begin the job. Here is what you will
need for most common wall paneling installations:
- Tape measure
- Level
- Pencil
- Power or table saw (12”+ cutting range) with short fine-toothed blade
- Adhesive and caulking gun (if adhesive installation type is used)
- Nails or screws (2D-4D),
- Eye goggles (must be worn when using any power or hand tools)
PANELS MEASUREMENTS:
!
11”
28”
23.5”