User's Manual

LED behavior
The LED on the HP bt300 tells you what is going on.
● Blinking—This is the default state and means the
device is installed and has power.
● Rapid blinking—A sending device is “Discovering” the
HP bt300.
● On steady—The HP bt300 is receiving data.
Bluetooth access modes
Access modes determine how easily a Bluetooth sending
device can print to a printer. The access modes are
defined by the following settings:
● Accessibility
● Security level
Accessibility mode
There are two available Accessibility modes for your
printer. Follow the instructions in your device user guide to
change the Accessibility mode.
● Visible to all (public/shown to all) (default)
When the printer's Accessibility setting is set to
“Visible to all”, any Bluetooth device within range can
discover and use the printer. This is the default setting
for your HP device.
● Not visible (private/hidden)
When the Accessibility setting is set to “Not visible”,
only sending devices that have stored the printer's
6 HP bt300 Bluetooth® Wireless Printer Adapter