User's Manual

3
Troubleshooting
Tip Many issues you do not find mentioned here may be
resolved by unplugging the adapter, turning the
printer off, then on, and plugging the adapter back
into the printer.
Bluetooth sending device cannot find printer
The HP bt300 is not
plugged into the printer or
the printer is turned off.
1 Turn on the printer.
2 Plug the adapter into
the camera/Pictbridge/
host USB port on the
printer. In many
cases, this port will be
on the front of the
printer.
3 Verify that the LED on
the HP bt300 is
blinking.
Accessibility is set to “Not
Visible”.
1 Select Bluetooth from
the printer's menu.
2 Select Accessibility.
3 Select Visible to All.
Security level is set to
“High".
1 Select Bluetooth from
the printer's menu.
2 Select Security Level.
3 Select Low.
Troubleshooting 13