Operator's Manual

Copywrite 2019, Smart Forced Air, Inc. Page 5 of 8
Select heating mode, cooling mode, or turn the system off.
Setting Time:
Use this menu to set the day and time.
Humidity Controls:
Allows the user to select the desired Humidity set point. If a dehumidifier is installed, this will run the
dehumidifier to get to this set point. If a humidifier is installed, this will run the humidifier to get to this
setpoint. If it is cold outside and window protection is enabled, the humidity setpoint can be
automatically decreased to attempt to prevent moisture from condensing on the window and freezing.
Fan Mode:
This allows the user to select if the fan is in AUTO mode (turns on when the furnace comes on), or ON
mode (always on).
User Settings:
This allows the user to configure items like whether temperatures will be displayed in degrees F or
degrees C, minimum and maximum set point temperature limits, etc.
System Info:
This section contains information about both the unit and the system and is for informational purposes
only; no settings can be changed. In this area, you will information about firmware revisions, units
linked into the system, etc.
Regulatory Info:
This section contains the FCC-ID of the unit and is for informational purposes only; no settings can be
changed.