Smart Forced Air, Inc. Director Operators Manual Version 1.3 28 January 2019 Copywrite 2019, Smart Forced Air, Inc.
Liability Disclaimer BEFORE INSTALLING AND USING THIS SYSTEM PLEASE READ AND UNDERSTAND THIS IMPORTANT LIABILITY DISCLAIMER: Incidental, consequential, punitive, and other similar damages associated with the operation of our system components are liabilities not assumed by Smart Forced Air, Inc. In any event, our maximum financial liability is limited to the total cost of the SFA products associated with any claim.
Welcome! Thank you for your purchase of the Smart Forced Air Director product. Physical Installation The Director product is designed to be near the furnace. The best mounting will be in an open location where you can secure the device to a piece of wood, or other non-metallic object, with two screws. Screw the Director to the chosen mounting location using the two included screws. Once the Director has been mounted, turn off the breaker to the HVAC unit to ensure the power is off for the wiring process.
If you have any questions about this process, contact your preferred HVAC dealer as there are hundreds of styles of HVAC unit. Once the wiring has been completed, the HVAC can be powered up and the Director can be configured using the menu system on the device. Device Configuration Once the HVAC unit has been powered up, the Director module should indicate it is operating properly by lighting up the Power LED and periodically flashing the Running LED.
How to Contact Us Find us on the web: www.smartforcedair.com Email Us: support@smartforcedair.com You can contact us via snail mail: Customer Service Smart Forced Air PO BOX 4090 Bozeman, MT 59772 Copywrite 2019, Smart Forced Air, Inc.
Warranty Smart Forced Air, Inc. (SFA) provides a two-year limited warranty against defects in materials and labor in the manufacturing process. The warranty period begins thirty days after we ship the product to the customer. We are aware of your shipping date and grant extra days to our warranty to allow for a reasonable worst-case shipping times and delays in getting the system installed and operational.
Regulatory Information FCC ID: 2ASCS-SFA2019DIR011 CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
