User Instructions

2. Plug in the power cord
Remove the dust cap then insert the power cable.
3. Turn the Repeater on
To turn on the Repeater press the switch on the side of the box.
The light inside the switch will come on.
4. To turn the Repeater off, press the switch again.
The light will turn off.
That’s all there is to it.
The Repeater will connect to, and repeat, the signal from any transmitter within range
automatically. You don’t need to do anything to make it happen.
Note: Both antennas should point up to the sky. The flat sides face the mares or WiFi Base
station (also called a Receiver).