Installation Instructions

Page 4 of 4
190710
The Bluetooth speakers will
not pair with a smart device.
Interference is causing confusion
with the connection.
Power both the device and the shop light off and
back on.
The fixture will be in “Reset” mode after turning
power off and on again. In this case, please remove
“shop light 1” from the smart device paired list and
rediscover it. Then pair the bluetooth speaker with
smart device again.
If unable to fix any of the above issues, please consult a certified electrician.
FCC WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the use’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to
Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequence energy and, if not installed and used in accordance
with
the instructions,may cause harmful interference to
radio communications. However,there is no guarantee that
interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your
body.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this SMART ELECTRICIAN lighting fixture breaks or fails
due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this
lighting fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, SMART
ELECTRICIAN agrees to have the product or any defective part(s) repaired or replaced with the same or similar
SMART ELECTRICIAN product or part free of charge, within the stated warranty period, when returned by the
original purchaser with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to
light bulbs; (2) does not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses,
labor, injuries to persons/property or costs. This warranty does give you specific legal rights and you may have other
rights, which vary from state to state.
R
R
R
R
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
Music settings on the smart device
need to be adjusted.
There is no sound or poor
sound quality from the
speakers.
Turn music on from the smart device.
Turn volume up from the smart device.
Interference is causing confusion
with the connection.
Power both the device and the shop light off and
back on.
Re-pair the device with shop light 1. When
successfully paired, the speakers will indicate
“Connected”.
Power off other Bluetooth devices within a 33 ft.
proximity range. Only one device can be connected
to the shop light/speakers at a time.
The Bluetooth device is too far
away from the shop light speakers.
Move the device closer to the shop light / speakers.
Problem
Possible Cause
Solution