Installation Instructions

ManualsBrandsSmart Electrician ManualsIndoor Lighting5000 Lumens 46" Integrated LED Bluetooth Speaker Shop Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Page 1 of 4

190710

Sku Number: 348-1442

LED BLUETOOTH SPEAKER SHOP LIGHT

Model Number: V1888

PACKAGE CONTENTS

HARDWARE CONTENTS Note: Hardware not shown actual size.

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching

off circuit breaker).

● Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact

any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury

or death from electric shock.

●

LED electronics can be damaged by electro static discharge (ESD)shock. Before installation, discharge yourself by

touching a grounded bare metal surface to remove this hazard. To avoid damage, do not touch the LED module.

CAUTION

● All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).

Contact your municipal building department to learn about your local codes, permits and/or inspections.

● Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician

before installation.

SAFETY INFORMATION

Mounting Chain With “S” Hook

Additional Pull Chain

Summary of content (4 pages)

PAGE 1
Sku Number: 348-1442 LED BLUETOOTH SPEAKER SHOP LIGHT Model Number: V1888 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A HARDWARE CONTENTS Note: Hardware not shown actual size. AA BB Mounting Chain With “S” Hook X2 Additional Pull Chain X1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
PAGE 2
PREPARATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses, Ladder, Wire Stripper.
PAGE 3
OPERATING THE SHOP LIGHT AND BLUETOOTH SPEAKERS: 1. Once plugged into power supply, the Bluetooth Speakers will sound a remind music, and the speaker are enabled and ready to connect. 2. Turn on/off light by using the pull chain.(Note:The speakers can continue working while the light is off. ) 3. Enable Bluetooth on your smart device. 4. Wait for the smart device to detect the “shop light 1” and then select it to pair the device to the speakers.
PAGE 4
Problem Possible Cause The Bluetooth speakers will Interference is causing confusion not pair with a smart device. with the connection. Solution Power both the device and the shop light off and back on. The fixture will be in “Reset” mode after turning power off and on again. In this case, please remove “shop light 1” from the smart device paired list and rediscover it. Then pair the bluetooth speaker with smart device again. There is no sound or poor sound quality from the speakers.