User's Guide

Chapter 2
11 smarttech.com/kb/171415
Chapter 2: Using basic features
Waking up the display and putting it back to sleep 11
Using the Home button 12
Using the convenience panel 12
Using the remote control 13
Using touch 15
Using the pens and erasers 17
Writing and drawing in digital ink 18
Using the SMART Ink dynamic (floating) toolbar 18
Changing a pen’s default color, thickness, and other properties 19
Erasing digital ink 19
Adjusting the volume 19
Freezing or hiding the screen 20
Freezing the screen 20
Showing and hiding the screen shade 20
Waking up the display and putting it back to sleep
The display’s occupancy sensor can detect people up to 16' (5 m) away when the display is in
Sleep mode. Depending on how the display is configured, it either turns on or enters Ready mode
when the sensor detects people.
If the display is in Ready mode, you can turn it on in a number of ways:
l
Press the Power button
on the convenience panel.
l Pick up a pen or the eraser.
The display returns to a partial sleeping state when one of the following occurs:
l The sensor detects no motion in the room for 60 minutes.
l
You press the Power button
on the convenience panel.
The display enters a full sleeping state after the sensor doesn’t detect anyone in the room.