Installation manual
27
www.smartavi.com
Network Setting Menu
The network setting menu allows you to assign a
static IP address to the SMTCP-2. It is recommended
that you statically assign an IP address to avoid any
future conict or connectivity issues with DHCP.
Device Cong Menu
The device conguration menu allows you to select the type of matrix you are using,
specify the dimensions of the matrix, and assign names to the inputs, outputs and presets,
reset the names and reset the system to factory defaults.
To begin, set the type of device you are using from the drop-down menu labeled Device
Type and specify the Matrix Dimensions. After specifying the Matrix Dimensions, press the
Submit button to make the changes.
Once the type of matrix is entered, you can assign names to each of your inputs, outputs
and presets. The preset names are used in the Matrix Menu for quick storage and retrieval
of matrix congurations. Leaving a preset blank will exclude it from the Matrix Menu.
Using the SMTCP module (continued)