Installation manual
10
www.smartavi.com
Using the SmartControl Software (continued)
Advanced Conguration: If you have more than one Router installed you
will want to check this box.
Router Type: Select “HDR8X8/HDR16X16”
Inputs/Outputs: Enter the number of Inputs/Outputs your HDR8X8/
HDR8X8/HDR16X16 has. The HDR8X8/HDR16X16 can have up to 8/16 inputs
and 8/16 outputs.
Com Port: Select the appropriate com port that your computer is
using to access the router.
Router Time out: By default this is 0 meaning the computer
acknowledges commands almost instantly. Sometimes a computer takes
longer to respond. This setting should be left at 0. If you need to change it, it
should be no higher than 0.2.
After you have entered in the necessary information click OK. This will now
take you to the Main Routing Window where you can route the dierent video/
audio connections.